TERRACOTTA FLOORING / ATTIC TILES
A PASSION FOR MORE THAN 70 YEARS
TERRACOTTA FLOORING / ATTIC TILES
Choosing Cotto della Corrigia for the floors of one’s home means satisfying one’s passion for natural materials, preferring a material that resists cold to heat and continuous trampling over the years, acquiring, unlike others, increasing prestige.
TRAFILED TABLES
Perfect male-female interlocking ensures quick and easy assembly, reducing lead times and costs for final fabrication. The product if properly assembled does not need to undergo any further steps. In fact, the plank with shaped sides can be laid either with mortar or dry, that is, without grouting the joints, thus avoiding the subsequent cleaning stage with considerable time savings.
The range consists of the following wheelbases : 40, 50, 60, 80, 100 cm, with different finishes, able to meet the most diverse requirements, both design and aesthetic.
With a traditional appearance, the under-roof tiles are at the same time equipped with all the indispensable features of a modern product, such as : strength, flatness with the related economic advantages of an industrial drawn product.
SMOOTH
Red dough, smooth finish-
Ideal for creating new ceilings with a typical warm and cozy appearance.
Available formats:
40×20 | 50×20 | 60×20 | 80×20 | 100×20
SABBIATA
Designed to have a rough surface with a sandblasted finish, this rustic-looking plank is very similar to handmade terra cotta.
Available formats:
40×20 | 50×20 | 60×20
ANTICA PIEVE
Rose-colored impasto, sandblasted finish with rustication. In addition to having a rusticated surface, which gives it an ‘antiqued look, Antica Pieve planking is sandblasted unevenly, using a very fine inert, creating a shaded and antiqued aesthetic effect.
Available formats:
40×20 | 50×20 | 60×20
GRANAIO
Light pinkish dough, sandblasted finish with rustication. Designed to have a rough surface with a sandblasted finish, this rustic-looking plank is very similar to handmade terra cotta.
Available formats:
40×20 | 50×20 | 60×20
SPLIT-PLATEDFULL TILES: UNDERGROUND OR FLOORING
Split-filled tiles, with a traditional appearance but the characteristics of a high-tech product, have a dual field of application ranging from floors to fair-faced attics.
Produced by drawing die, they can have the size of 15×30 or 15×40, thickness 2.6 cm. The hygroscopicity of the clay and the mass of the artifact create healthy indoor environments and thermal phase shifting of the roof, respectively, both of which are essential features for making excellent exposed roof attics.
MINERVA
The colors and warm natural tones of clay come together to create delicate shades that characterize the Minerva finish. The hygroscopicity of the clay and the mass of the artifact create healthy indoor environments and thermal phase shifting of the roof, respectively, both of which are essential features for making excellent exposed roof attics. Used in closures in direct contact with the living environment and thus with the user, it allows, with its high coefficient of hygroscopicity, the migration of vapor, preventing the formation of efflorescence, mold and condensation, the cause of health damage.
ASH
MARS
Due to its high tensile strength and very low water absorption (less than 6%), it is an ideal product not only for attics but also for outdoor sidewalks such as driveways, gardens and sidewalks. Produced in two-piece blocks, it is easy to split and assemble, and requires no treatment after installation.
FACE FACE TILES UNDERTOP OR FLOORING
Choosing to use face-faced terracotta, for the construction of floors or flooring of your home, emphasizes the knowledge that you have chosen a material that will last a long time, but above all, that will be more and more beautiful as the years go by. Terracotta made from three main elements : earth, water, fire, is alive, natural and breathing, and is resistant to cold, heat, and the wear and tear of passing time, becoming more and more valuable.
| Format | Thickness | MU. | No. pieces per U.M. |
| 25×12 | 2,5 o 3,5 | m.q. | 33 |
| 15×30 | 2,7 o 3 | m.q. | 22 |
| 40×20 | 2,7 | m.q. | 12,5 |
| 50×20 or 25 | 2,7 | m.q. | 18 o 8 |
| Format | Thickness | MU. | No. pieces per U.M. |
| 25×12 | 2,5 | m.q. | 33 |
| 14×28 | 2,5 | m.q. | 28 |
| 15×30 | 3 | m.q. | 22 |
| 18×36 | 2,5 | m.q. | 15 |
| 20×40 | 2,5 | m.q. | 12,5 |
| 50×20 or 25 | 2,7 | m.q. | 10 o 8 |
| 20×20 | 2,5 | m.q. | 25 |
| 25×25 | 2,5 | m.q. | 16 |
| 30×30 | 2,5 | m.q. | 11 |
| Format | Thickness | MU. | No. pieces per U.M. |
| 25×12 | 2,5 | m.q. | 33 |
| 14×28 | 2,5 | m.q. | 28 |
| 15×30 | 3 | m.q. | 22 |
| 18×36 | 2,5 | m.q. | 15 |
| 20×40 | 2,5 | m.q. | 12,5 |
| 50×20 or 25 | 2,7 | m.q. | 10 o 8 |
| Format | Thickness | MU. | No. pieces per U.M. |
| 15×30 | 2 o 2,5 | m.q. | 22 |
| 18×36 | 2,5 | m.q. | 15 |
| 40×20 | 3 | m.q. | 12,5 |
| 50×25 | 3 | m.q. | 8 |
